products find a sales agent applications lab testing technical library
Additional
Finishing Mill Info
Finishing Mills

Accessories

Batch Series

Long Radius Series

Spiral Series

Relines
Batch Series Finishing Mills

Batch Series Vibratory Finishing Mills deburring, deflashing equipment from Sweco
Brochures
FM-3

FM-10

FM-1.2C
Capacity 1.2 ft³ (300 lbs. load capacity)
Maximum Straight Part Length 9 inches
Motion Generator 1/3 hp, TENV, 1200 RPM, single phase 115 volt; 3-phase 230, 460 or 575 volt. 60 Hz.
Vibralite Bowl Chamber - all cast polyurethane elastomer with ¾" minimum thickness in high wear areas
Shipping Weight 210 lbs. (empty)
FM-3C & FM-3HA
Capacity 3 ft³ (900 lbs. load capacity)
Maximum Straight Part Length 12 inches
Motion Generator 1 ¼ hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz.
Lining 5/16" Cast Polyurethane Elastomer
Shipping Weight Approximately 550 lbs.
FM-10V & FM-10C
Capacity 10 ft³ (3000 lbs. load capacity)
Maximum Straight Part Length 24 inches
Motion Generator 5 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz.
Lining ¾" Cast Polyurethane Elastomer
Shipping Weight Approximately 1175 lbs.
Model FM-10C available with curved outer chamber wall.
FM-20HA
Capacity 20 ft³ (6000 lbs. load capacity)
Maximum Straight Part Length 30 inches
Motion Generator 10 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz.
Lining ¾" Cast Polyurethane Elastomer
Shipping Weight Approximately 2500 lbs. (including control panel)