Vibro-Energy Round Separator
| • |
One of our most requested types of testing |
| • |
Horizontal and vertical motion utilized |
| • |
Can be set-up and tested in a variety of different arrangements depending on the desire output and testing objectives |
| • |
Testing is typically performed on dry materials, though equipment is suitable for wet applications, as well |
| • |
Consecutive cuts can be achieved to produce multiple fractions with specific particle size ranges |
| • |
Testing can be conducted to aid in screen mesh selection, determine an approximate feed and processing rate for a given material using a given screen mesh, or to gather details pertaining to the material splits and particle size distributions for each fraction |
| • |
One to several 5-gallon pails is typically enough material for testing purposes |
Ultrasonics
| • |
Round separator is easily adapted to incorporate ultrasonic vibration technology |
| • |
Ideal in the separation of very fine particles and preventing screen blinding for certain materials |
GyraMax Gyratory Sifters
| • |
Ideal coarse separation for dry applications that require higher processing rates |
| • |
Feasibility can be determined on the mini-GyraMax with a 5-gallon pail of material, or full-scale testing can be performed on the larger 3’x10’ GyraMax |
| • |
Specially designed feed hopper and gravimetric/volumetric weigh-belt feeder allow for accurate and consistent feed of material to the machine |
| • |
Lab unit is equipped with 2-decks, allowing for consecutive cuts to be made per run |
| • |
Fraction outputs can be easily weighed, even when large quantities of material are processed, and particle size analyses are typically performed on the feed material and fractions of interest |
Turbo-Screen Air Classifier
| • |
Provides continuous, precise screening for certain dry materials |
| • |
Can handle difficult materials such as those with finer particle sizes (down to 70 microns), electrostatic materials, and materials that tend to agglomerate easily |
| • |
Typically works well with very fine low abrasion powders |
| • |
Works best as a scalping operation which allows for generous feed rates |
Centrifugal Separation
| • |
Tool in evaluating the feasibility of centrifugal equipment for a given application |
| • |
Used for wet applications only |
| • |
Separates slurries according to the different densities of materials within the mixture, typically producing a two-phase solids/liquid separation |
| • |
When used in conjunction with moisture analysis and particle size analysis equipment, the feed material can be compared to the effluent, or liquid portion, to determine the percentage and size range of solids removal achieved |
Vibro-Energy Grinding Mills
| • |
Capable of grinding a wide variety of materials |
| • |
Suitable for wet or dry applications |
| • |
With a variety of grinding media sizes, shapes, and materials available, the lab can fine tune any grinding application |
| • |
Paired with our particle size analysis equipment to accurately evaluate grinding performance |
|
Vibratory Round Separators |
Low Profile Flow-Thru Separators |
GyraMax Gyratory Sifters |
Centrifuges |
Vibratory Grinding Mills |
|
used equipment