Broadloom Specifications - Data Table

Material Type	Mesh count per inch	Weave Type	Wire Diameter Warp (mm)	Wire Diameter Weft (mm)	Aperture width (mm)	Aperture length (mm)	Open Area %	Weight kg/sq m
316L	5/5	Plain, half round	1.8/0.65	1.8/0.65	3.28	3.28	41.7	2.83
316L	12/14	Plain	0.53	0.53	1.59	1.29	53.10	1.89
316L	20/20	Plain	0.45	0.45	0.82	0.82	42.00	2.01
316L	30/30	Plain	0.315	0.315	0.53	0.53	39.40	1.40
316L	36/36	Plain	0.25	0.25	0.46	0.46	41.70	1.04
316L	40/36	Plain	0.25	0.25	0.39	0.46	39.20	1.19
316L	45/45	Plain	0.236	0.236	0.33	0.33	33.90	1.17
316L	54/50	Plain	0.21	0.21	0.26	0.30	32.50	1.14
316L	60/45	Plain	0.22	0.22	0.21	0.35	29.20	1.21
Bronze	12/14	Plain	0.67	0.67	1.45	1.15	43.10	3.01
Bronze	30/30	Plain	0.315	0.315	0.53	0.53	39.40	1.58
Bronze	38/32	Plain	0.26	0.28	0.41	0.51	39.50	1.44
Bronze	64/52	Twill	0.24	0.25	0.16	0.24	19.50	1.66
Bronze	68/52	Twill	0.22	0.23	0.15	0.26	21.80	1.64
Bronze	70/48	Plain	0.20	0.205	0.16	0.33	27.50	1.36

In addition to these stock specifications a significant proportion of our weaving capacity is dedicated to customer specific materials.
This enables us to utilize our full range of weaving capabilities to maximize customer choice.
Some of these bespoke products include:

• Rod or twist wire in one or both directions.
• Warp and Weft in different alloys, and materials including synthetic mono-filament.
• Complex weave types.

The table below shows some examples of these possibilities:
 

Material Type	Mesh count per inch	Weave Type	Wire Diameter Warp (mm)	Wire Diameter Weft (mm)	Aperture width (mm)	Aperture length (mm)	Open Area %	Weight kg/sq m
316L	22/24	Flat warp plain	0.33/0.48	0.48	0.67	0.58	31.8	2.24
316L	24/16	Single Twist	6 x 0.21	0.43	0.43	1.16	29.60	2.70
Synthetic /Bronze	30/25	Plain	0.40	0.34	0.45	0.68	35.10	1.14
Synthetic/Stainless Steel	30/25	Plain	0.40	0.34	0.45	0.68	35.10	1.14
Bronze	48/40	Flat Warp Twill	0.285/0.23	0.315	0.25	0.32	28.30	1.83
Bronze/Brass	70/68	Triple Warp	3 x 0.095	0.19	0.08	0.18	10.60	1.17